Circuit closure can reduce water consumption, but negative effects on pulp quality and equipment wear may make it unfeasible. This study aimed to evaluate how the alkaline fi ltrate of the recirculation stage (EP) affects bleaching, pulp quality and characteristics of the fi ltrates produced. Pre-delignifi ed cellulose pulp from a mixture of three coniferous woods was used. Bleaching followed the D(EPO)DED sequence, with the addition of 5, 10 and 15 kg.odt-1 of the alkaline fi ltrate (EP) to the pre-O2 pulp. The physical and mechanical cellulosic pulp properties were evaluated in the control and with 10 kg.odt-1 of the alkaline fi ltrate. The inorganic compound accumulation in the system was evaluated in the control pulp and with 15 kg.odt-1 of the alkaline fi ltrate. The fi ltrate use increased the ClO2 consumption for bleaching and sulfuric acid and NaOH to adjust the pH of the stages. The pulp tensile index was higher and the tear index lower with the fi ltrate use in pulp without refi nement, however the properties of refi ned pulp were similar between treatments. The fi ltrate increased the calcium, chloride, sodium and sulfate levels in the D stage and that of sodium and sulfate after the (EPO) stage. Filtrate recirculation can reduce water use, but it increases bleaching costs and metal accumulation in the system.
